Earth Notes: Battery Sounds: How Does a Battery Sound in Time-lapse?Updated 2019-10-19 14:48 GMT.
WARNING: some parts of this are quite loud!
Hi, I'm Damon Hart-Davis, and this is a quick bonus Earth Notes podcast episode for 13th October 2019.Following on from the "rad sounds" I decided to "audify" some battery data. Enjoy!
I used the same techniques, including sampling faster than needed, and using Audacity to get down to 44.1kHz (Normalize then Resample) and thus one year per second.
The same strong 'daily' 365Hz tone is in there, a little 'buzzy' as usual because the data is messy real-life, and not a perfect sine wave.
Each of the datasets turned into audio here runs from early August 2018 (when the Enphase was installed) through to the end of September 2019. So each 'track' is just over 1 second in length.
First I tried listening to how full the Enphase AC Battery was, also known as its state of charge (SoC). Because this changes relatively smoothly this one is not very buzzy. It is quieter in winter when the battery often doesn't get a full charge for example.
Then I tried listening to how the battery charges, which is being driven from my large PV array, so fairly abruptly goes from nothing to full on and back again most days. It does follow the sun in regularity, but charging is sometimes interrupted when we turn on a big load such as the kettle or oven. Like all of them, this has a seasonal element to it.
Next up is discharging, which is more random and buzzy, depending on when we run appliances. The fridge/freezer's regular demands for 80W half the time are in there somewhere.
Then, in Audacity, I shoved charging into the left channel and discharging into the right. The stereo hints at something interesting.
Finally, and very seasonally, is the PV generation as measured by the Enphase. Even this is more noisy than you might expect, as sunshine is significantly intermittent in the UK!
There's more on my "Earth Notes" Web site at Earth.Org.UK.
First off, the Enphase AC Battery state-of-charge (SoC) with 5-minute sampling, then Normalize/Resample (.wav):
Battery charging with 15-minute sampling, then N/R (.wav):
Battery discharging with 15-minute sampling, then N/R (.wav):
Battery charging (left channel) and discharging (right channel) with 15-minute sampling, then N/R (.flac made in Audacity):
PV generation as recorded by the Enphase with 15-minute sampling, then N/R (.wav):
Bonus bonus, thinking ahead, maybe straying into "sonification"...
PV generation from same source, then: Normalize, Low-Pass Filter at 500Hz with 24dB/octave roll-off (to suppress anything above 'daily' and make seasonal stand out), Normalize, Resample:
I locally record some Enphase AC Battery stats every 5 minutes, including state-of-charge (SoC), ie how full the battery is. I currently have data from 2018-08 to 2019-09 inclusive. (The unit was not installed until a few days into 2018-08.)
cat data/16WWHiRes/Enphase/201*.log.gz | gzip -d | sh script/mkaudio/EnphaseSoCtoWAV.sh > ~/tmp/out.wav
Flows in and out of the battery (charging and discharging) are also recorded and available remotely from Enphase at 15-minute resolution. I tweaked the script to select which parameter to audify, eg charge or discharge. Data from the same 2018-08/2019-09 range is used as above.
cat data/16WWHiRes/Enphase/adhoc/net_energy_201*.csv.gz | gzip -d | sh script/mkaudio/Enphase15mFlowsToWAV.sh > img/audio/mkaudio/Enphase-ACB-15m-charge-13M-mono.wav